<p>Castaly offers several options of tenoners. Refer to the list of features and specifications to find the one that best meets your requirements.</p>
<h3>Features:</h3>
<div>
<ul>
<li>With the Double End Miter Saw, you can do cut-off stock faster or consider a Double End Miter Saw combined with moulding head. It lets you cut off stock and moulding pattern in a single feed, that saves time, space, and cost.</li>
<li>Air-operated clamp comes down holding sticks firmly in place. After workpiece is clamped, table starts to feed, performs trimming, shaping operations.</li>
<li>With trim saw, you can cut stock clearly, no burrs for a trimming purpose.</li>
<li>Moulding spindle is mounted at the rear of saw head enabling the machine to perform edge moulding after stock is cut off.</li>
<li>The entire cutting cycle, cut-off, shaping tenon or mortise, is automatically operated at single pass of stock feeding.</li>
<li>The table travels on a precision linear motion guide for stability.</li>
<li>The table traverse is driven by power system, ensuring very stable, smooth workpiece feeding.</li>
<li>Variable feed speed permits proper feed selection for hard or soft wood materials.</li>
<li>Big hand wheel adjusts depth of cut.</li>
<li>All controls are grouped in a control panel.</li>
<li>Industrial full power motor for maximum cutting capacity.</li>
<li>Other size is optional.</li>
<li>Precision sealed long-life bearing.</li>
<li>Heavy cast iron frames and table for durability usage.</li>
</ul>
<p> </p>
<table style="width: 791px;" border="1" cellspacing="0" cellpadding="0">
<tbody>
<tr>
<td colspan="2" width="323">
<p><strong>SPECIFICATIONS:</strong></p>
</td>
<td width="156"> </td>
</tr>
<tr>
<td rowspan="4" width="113">
<p>CAPACITY </p>
</td>
<td width="210">
<p>Max. Length or Cut</p>
</td>
<td width="156">
<p align="center">60"</p>
</td>
</tr>
<tr>
<td width="210">
<p>Min. Length of Cut</p>
</td>
<td width="156">
<p align="center">12"</p>
</td>
</tr>
<tr>
<td width="210">
<p>Max. Width of Cut</p>
</td>
<td width="156">
<p align="center">24"</p>
</td>
</tr>
<tr>
<td width="210">
<p>Max. Clamping Thickness</p>
</td>
<td width="156">
<p align="center">4 1/2"</p>
</td>
</tr>
<tr>
<td rowspan="4" width="113">
<p>SAW (TRIM) </p>
</td>
<td width="210">
<p>Saw Blade Dia.</p>
</td>
<td width="156">
<p align="center">8" ~ 12" x 2</p>
</td>
</tr>
<tr>
<td width="210">
<p>Saw Arbor Dia.</p>
</td>
<td width="156">
<p align="center">1"</p>
</td>
</tr>
<tr>
<td width="210">
<p>Saw Blade Speed</p>
</td>
<td width="156">
<p align="center">3400 RPM</p>
</td>
</tr>
<tr>
<td width="210">
<p>Saw Head Swivel (Degree)</p>
</td>
<td width="156">
<p align="center">360</p>
</td>
</tr>
<tr>
<td width="113">
<p>MOULDER</p>
</td>
<td width="210">
<p>Moulder Spindle</p>
</td>
<td width="156">
<p align="center">1 " Dia. x 5" L x 2</p>
</td>
</tr>
<tr>
<td width="113">
<p>(COPE)</p>
</td>
<td width="210">
<p>Spindle Speed</p>
</td>
<td width="156">
<p align="center">6000 RPM</p>
</td>
</tr>
<tr>
<td width="113">
<p>(SHAPER)</p>
</td>
<td width="210">
<p>Spindle Swivel</p>
</td>
<td width="156">
<p align="center">360</p>
</td>
</tr>
<tr>
<td rowspan="3" width="113">
<p>TRAVERSE </p>
</td>
<td width="210">
<p>Saw Longitudinal Travel</p>
</td>
<td width="156">
<p align="center">12"</p>
</td>
</tr>
<tr>
<td width="210">
<p>Saw Vertical Travel</p>
</td>
<td width="156">
<p align="center">17"</p>
</td>
</tr>
<tr>
<td width="210">
<p>Carriage Cross Travel</p>
</td>
<td width="156">
<p align="center">24"</p>
</td>
</tr>
<tr>
<td rowspan="2" width="113">
<p>MOTOR</p>
<p align="center"> </p>
</td>
<td width="210">
<p>Saw Head Drive</p>
</td>
<td width="156">
<p align="center">2 HP x 2</p>
</td>
</tr>
<tr>
<td width="210">
<p>Moulder Spindle</p>
</td>
<td width="156">
<p align="center">2 HP x 2</p>
</td>
</tr>
<tr>
<td rowspan="2" width="113">
<p>WEIGHT</p>
<p align="center"> </p>
</td>
<td width="210">
<p>N.W.</p>
</td>
<td width="156">
<p align="center">1500 LBS</p>
</td>
</tr>
<tr>
<td width="210">
<p>G.W.</p>
</td>
<td width="156">
<p align="center">1760 LB5</p>
</td>
</tr>
</tbody>
</table>
</div>
