<p>Castaly 1 Vertical 1 Universal x 21 Drills Two-Line Boring Machine BR-3242U is standard design and constructed for horizontal and vertical boring units.</p>
<h3>Features:</h3>
<div>
<ul>
<li>The left-side 21 vertical drills, drill head can be adjusted to any degree position for vertical or horizontal axis combination construction drill. (21-2121U One 21 Drill Head, BR-2142U Two 21 Drill Head).</li>
<li>The machine is easy to operate. Simply press the foot switch and entire horizontal and vertical boring operations can be accomplished by pneumatic power.</li>
<li>Vertical boring for drilling at longitudinal and cross directions. The left-hand side vertical boring units can be tilted from vertical to horizontal position by pneumatic piston.</li>
<li>The vertical boring units can be adjusted up & down and right & left. Readouts are provided for accurate indication of adjustment.</li>
<li>An emergency switch is provided on the top beam, allowing the operator to stop the machine conveniently.</li>
<li>The panel clamp position is adjustable.</li>
<li>Square slide way for vertical boring unit, providing maximum rigidity and stability for boring operations.</li>
</ul>
<p> </p>
<table border="1" cellspacing="0" cellpadding="0">
<tbody>
<tr>
<td width="203">
<p><strong>SPECIFICATIONS:</strong></p>
</td>
<td width="150">
<p align="center"> </p>
</td>
</tr>
<tr>
<td width="203">
<p>Motor</p>
</td>
<td width="150">
<p align="center">2 HP x 2</p>
</td>
</tr>
<tr>
<td width="203">
<p>Drill Speed</p>
</td>
<td width="150">
<p align="center">3400 RPM</p>
</td>
</tr>
<tr>
<td width="203">
<p>Drill Bit Type</p>
</td>
<td width="150">
<p align="center">M 10</p>
</td>
</tr>
<tr>
<td width="203">
<p>Table Size (W x L)</p>
</td>
<td width="150">
<p align="center">36” x 95”</p>
</td>
</tr>
<tr>
<td width="203">
<p>Vertical Base Travel</p>
</td>
<td width="150">
<p align="center">2”</p>
</td>
</tr>
<tr>
<td width="203">
<p>Horizontal Base Travel</p>
</td>
<td width="150">
<p align="center">12”</p>
</td>
</tr>
<tr>
<td width="203">
<p>Head Swing (Degree)</p>
</td>
<td width="150">
<p align="center">0 ~ 90</p>
</td>
</tr>
<tr>
<td width="203">
<p>Standard Drill Spindle</p>
</td>
<td width="150">
<p align="center">21 Bits x 2</p>
</td>
</tr>
<tr>
<td width="203">
<p>Drill Between Center</p>
</td>
<td width="150">
<p align="center">32 mm</p>
</td>
</tr>
<tr>
<td width="203">
<p>First to Last Drill</p>
</td>
<td width="150">
<p align="center">640 mm</p>
</td>
</tr>
<tr>
<td width="203">
<p>Air Clamp</p>
</td>
<td width="150">
<p align="center">4</p>
</td>
</tr>
<tr>
<td width="203">
<p>Multi Drill Head Exchange</p>
</td>
<td width="150">
<p align="center">No</p>
</td>
</tr>
<tr>
<td width="203">
<p>Stroke Rate (Cycle/Min)</p>
</td>
<td width="150">
<p align="center">0 ~ 10</p>
</td>
</tr>
<tr>
<td width="203">
<p>Head Stroke (Drill Depth)</p>
</td>
<td width="150">
<p align="center">0 ~ 2 ½”</p>
</td>
</tr>
<tr>
<td width="203">
<p>N.W.</p>
</td>
<td width="150">
<p align="center">960 LBS</p>
</td>
</tr>
<tr>
<td width="203">
<p>G.W.</p>
</td>
<td width="150">
<p align="center">1100 LBS</p>
</td>
</tr>
</tbody>
</table>
</div>
