<p>Castaly Machinery offers several options for Super Duty Moulders. Please refer to the features and specifications of each to find the one that best meets your needs.</p>
<h3>Features:</h3>
<div>
<ul>
<li>Feed speeds ranging from 20' ~ 98' per minute are a standard feature, faster feed speeds up to 120" per minute are available.</li>
<li>The full safety enclosure cover as chips guard and helps to reduce noises.</li>
<li>Table surface is hard-chrome plated for maximum wear resistance.</li>
<li>All manually adjusted turning parts are housed in dry bearings for oil-free lubrication.</li>
<li>One-piece, cast iron machine frame and table is especially normalization heat treated for maximum stability and rigidity.</li>
<li>The smooth initial feeding of the stock is achieved by the independently powered infeed rollers.</li>
<li>All spindles are precision constructed and especially heat treated to provide maximum cutting stability and permanent accuracy.</li>
<li>Standard spindle speed is 8,000 RPM. Higher spindle speeds are available upon request.</li>
<li>Fence adjusted is quickly accomplished by a quick-setting lever.</li>
<li>The three independent section, pneumatic pressure for the infeed rollers, in-process rollers and outfeed rollers can be set with individual pressure allowing for consistent feeding results and outstanding effect.</li>
<li>The entire motion controls of the machine are centralized on the control panel for convenient operations.</li>
<li>All control levers for the spindles are located at the front of the machine for convenient adjustment.</li>
<li>Each spindle is provided with a mechanical digital read out, that gives accurate adjustment.</li>
<li>The pressure roller for short stock can be raised fast, providing maximum convenience while cutter changing or setup.</li>
<li>The device permits the feeding of short stocks with a minimum length of 8".</li>
<li>Vertical spindle adjustment up to 80 mm, it allows to fit several tools on the vertical spindle, eliminating troublesome cutter change.</li>
<li>Separate adjustment of vertical spindle and insert table, permits the table to be positioned extremely close to the cutter head for added cutting stability.</li>
<li>The front pressure plate features draw-back performance which fully avoids damage on cutters caused by an over-height workpiece.</li>
<li>The rear pressure plate provides extremely uniform molding pressure for outstanding parallelism accuracy of machining.</li>
<li>An individual motor drives each spindle and is separately mounted to eliminate spindle chattering during high speed running.</li>
<li>The roller in the infeed table is powered, providing a smooth feeding effect for the tough stock.</li>
<li>The spindles are lubricated by the centralized lubrication system for convenience.</li>
</ul>
</div>
<p> </p>
