<p>Castaly features many options when it comes to combination planer/sanders. Please review features and specifications of each to find the one that best meets your needs.</p>
<h3>Features:</h3>
<div>
<ul>
<li>This machine especially designed for tale off heavy material such as glue panel, bend board, rough lumber.</li>
<li>The first station is a knife planer head, followed with a combination drum & platen head at second station.</li>
<li>Head configuration can be made to meet customer?s requirement.</li>
<li>The spiral planer cutter head is fitted with 14 x 14 mm, four edge throw away Tungsten Carbide knife inserts, it is providing superior chip removal rate, minimum noise, and extremely smooth cutting effect.</li>
<li>Changing knife inserts are conveniently made without removing the cutter head. The spiral cutter head is precision machined from special aluminum alloy steel by CNC machine center, tempered and precision ground.</li>
<li>Anti-kickback fingers mounted at the infeed of the machine; this anti-kickback finger gives a safety guard for the operator.</li>
<li>Insufficient pressure protection, in case insufficient working air pressure occurs, the machine brakes automatically for safety guard.</li>
<li>Irreversible running of pressure roller, runs a single direction only, giving an additional safety guard for panel kickback.</li>
<li>Automatic Elevation of Conveyor Table (Micro-Computer Controlled with Digital Readout), it accurately display the position of the conveyor table and automatic move to the setting thickness for planning, sanding.</li>
<li>Panel cleaning brush roller; built at outfeed end of the machine, this cleaning brush roller cleans the powder on the sanded panel.</li>
<li>Hold-Down plate is hard chrome treated for maximum wear resistance.</li>
</ul>
<p> </p>
<table style="width: 480px;" border="1" cellspacing="0" cellpadding="0">
<tbody>
<tr>
<td width="165">
<p><strong>SPECIFICATIONS:</strong></p>
</td>
<td width="147"> </td>
</tr>
<tr>
<td>
<p>Working Width</p>
</td>
<td width="147">
<p align="center">43"</p>
</td>
</tr>
<tr>
<td>
<p>Working Thickness</p>
</td>
<td width="147">
<p align="center">4"</p>
</td>
</tr>
<tr>
<td>
<p>Min. Working Length</p>
</td>
<td width="147">
<p align="center">18½"</p>
</td>
</tr>
<tr>
<td>
<p>Main Motor</p>
<p>(Standard)</p>
</td>
<td width="147">
<p align="center">25, 20 HP</p>
</td>
</tr>
<tr>
<td>
<p>Feeding Motor</p>
</td>
<td width="147">
<p align="center">5 HP </p>
</td>
</tr>
<tr>
<td>
<p>Table Hoist Motor</p>
</td>
<td width="147">
<p align="center">1 HP</p>
</td>
</tr>
<tr>
<td>
<p>Feeding Speed</p>
<p>(Variable)</p>
</td>
<td width="147">
<p align="center">10 ~ 53 FPM</p>
</td>
</tr>
<tr>
<td>
<p>Sanding Belt Size</p>
</td>
<td width="147">
<p align="center">43" x 98 "</p>
</td>
</tr>
<tr>
<td>
<p>Machine Size</p>
<p>(L x W x H)</p>
</td>
<td width="147">
<p align="center">107" x 81" x 90"</p>
</td>
</tr>
<tr>
<td>
<p>N.W.</p>
</td>
<td width="147">
<p align="center">7200 LBS</p>
</td>
</tr>
<tr>
<td>
<p>G.W.</p>
</td>
<td width="147">
<p align="center">8100 LBS</p>
</td>
</tr>
</tbody>
</table>
</div>
<p> </p>
