<p>Featuring a 10′ frame, and 50″maximum crosscut with an unlimited rip cut, the Safety Speed H4 Panel Saw is a preferred solution for cabinet and furniture makers. The only difference between this model and our H5 and H6 models are that the they provide 64″, and 74″ maximum crosscuts. All three H machines feature the same Milwaukee Motor.</p>
<p><!--StartFragment-->The H4 offers full-sized vertical panel saw productivity in economical
machines. The model H4 saws cut within 1/32″ on a wide variety of panel
materials up to 1¾” thick. H-Series saws are used in all kinds of panel
processing applications.<!--EndFragment--></p>
<h3>Standard Equipment:</h3>
<div>
<ul>
<li>3 ¼ HP, 15 amp industrial duty saw motor.</li>
<li>Zinc-plated 1 ¾”steel guide tubes.</li>
<li>4 Nylatron roller bearing systems.</li>
<li>Adjustable vertical and horizontal rulers.</li>
<li>Quick change from vertical to horizontal cutting.</li>
<li>Thin material pressure guard.</li>
<li>Injection-molded plastic material rollers.</li>
<li>Spring-loaded counter balance system.</li>
<li>Integrated dust collection bonnet.</li>
<li>Extended warranty.</li>
<li>TUV certified to UL/CSA standards.</li>
</ul>
<p> </p><table>
<tbody><tr>
<td width="165">
<p><b>Specifications:</b></p>
</td>
<td width="267">
</td>
</tr>
<tr>
<td width="165">
<p>Weight</p>
</td>
<td width="267">
<p>244 lbs</p>
</td>
</tr>
<tr>
<td width="165">
<p>Dimensions</p>
</td>
<td width="267">
<p>120 × 11 × 70 in</p>
</td>
</tr>
<tr>
<td width="165">
<p>Max. Crosscut</p>
</td>
<td width="267">
<p>50"/1270mm</p>
</td>
</tr>
<tr>
<td width="165">
<p>Max. Rip Cut</p>
</td>
<td width="267">
<p>Unlimited</p>
</td>
</tr>
<tr>
<td width="165">
<p>Cut Depth</p>
</td>
<td width="267">
<p>1 ¾"/45mm</p>
</td>
</tr>
<tr>
<td width="165">
<p>Cut Accuracy</p>
</td>
<td width="267">
<p>1/32"/.8mm</p>
</td>
</tr>
<tr>
<td width="165">
<p>Frame Length</p>
</td>
<td width="267">
<p>120"/3050mm</p>
</td>
</tr>
<tr>
<td width="165">
<p>Daily Usage</p>
</td>
<td width="267">
<p>1-3 Hours</p>
</td>
</tr>
<tr>
<td width="165">
<p>Saw Blade Diameter</p>
</td>
<td width="267">
<p>8"/210mm</p>
</td>
</tr>
<tr>
<td width="165">
<p>Rollers</p>
</td>
<td width="267">
<p>14</p>
</td>
</tr>
<tr>
<td width="165">
<p>Motor Amps and Volts</p>
</td>
<td width="267">
<p>15 amp, 120 Volt, 7.5 amp, 220 Volt</p>
</td>
</tr>
<tr>
<td width="165">
<p>Motor Manufacturer</p>
</td>
<td width="267">
<p>Milwaukee Tool</p>
</td>
</tr>
</tbody></table>
</div>
