<p>Castaly Manual Slide Raised Panel Door Shaper CS-55PAME is <!--StartFragment-->specially designed to
make all the parts for raised panel doors by one spindle shaper without
changing knife (rail stile, panel) to get mass production.<!--EndFragment--></p>
<h3>Features:</h3>
<ul>
<li>It is also able to do the chair leg, furniture parts by the maximum 7" width (in and out) copy capacity.<br></li>
<li>The 6" high stackable spindle with 3 pneumatic stops are easily and accurately setup for each cutter position.</li>
<li>Rigid construction made by heavy sheet metal frame, case iron table & base for durability usage.</li>
<li>Full power industrial motor is suitable for best cutting capacity.</li>
<li>Strong cutting power does not need to be precut for the arch or oval panel.</li>
<li>Linear guide rails and bearings can let the operator moving the table by lightweight and smoothly to get the long life usage.</li>
<li>Cast iron fence locked in the groove to finish square cut and centering the workpiece easily.</li>
<li>Heavy-duty air pistons hold down the workpieces tightly without slide during the cutting process.</li>
<li>Two separate stops for rail, stile or panel arch cutting positions.</li>
</ul>
<p> </p>
<table style="width: 357px;">
<tbody>
<tr>
<td>
<p><strong>SPECIFICATIONS</strong></p>
</td>
<td style="text-align: center;"> </td>
</tr>
<tr>
<td>
<p>Max. Cutting Capacity</p>
</td>
<td style="text-align: center;">
<p> </p>
</td>
</tr>
<tr>
<td>
<p>Length (left to right)</p>
</td>
<td style="text-align: center;">
<p>55"</p>
</td>
</tr>
<tr>
<td>
<p>Width (in and out)</p>
</td>
<td style="text-align: center;">
<p>7"</p>
</td>
</tr>
<tr>
<td>
<p>Thickness</p>
</td>
<td style="text-align: center;">
<p>6"</p>
</td>
</tr>
<tr>
<td>
<p>Max. Cutter Size</p>
</td>
<td style="text-align: center;">
<p>7"</p>
</td>
</tr>
<tr>
<td>
<p>Spindle Diameter</p>
</td>
<td style="text-align: center;">
<p>1¼ "</p>
</td>
</tr>
<tr>
<td>
<p>Spindle Length</p>
</td>
<td style="text-align: center;">
<p>6"</p>
</td>
</tr>
<tr>
<td>
<p>Spindle Speed</p>
</td>
<td style="text-align: center;">
<p>9000 RPM</p>
</td>
</tr>
<tr>
<td>
<p>Main Motor</p>
</td>
<td style="text-align: center;">
<p>10 HP</p>
</td>
</tr>
<tr>
<td>
<p>Dust Hood</p>
</td>
<td style="text-align: center;">
<p>4"</p>
</td>
</tr>
<tr>
<td>
<p>Net Weight</p>
</td>
<td style="text-align: center;">
<p>2650 LBS</p>
</td>
</tr>
<tr>
<td>
<p>Gross Weight</p>
</td>
<td style="text-align: center;">
<p>3160 LBS</p>
</td>
</tr>
</tbody>
</table>
