<p>Castaly Finger Jointer Shaper / Tenoner Auto SFJ-610 features auto in and outfeed conveyor. The SFJ-610 performs scrolling, end trimming and shaping functions on right or left end of sticks.</p>
<h3><strong>Features:</strong></h3>
<ul>
<li class="simple-check-list">Air-operated clamp comes down holding sticks firmly in place. After workpiece is clamped, table starts to feed, performs trimming and shaping operations.</li>
<li class="simple-check-list">The trim saw is fitted to cut the stock for even end of edges.</li>
<li class="simple-check-list">The sharper spindle is precision-constructed for cutting finger, tenon shapes accurately and accommodates a maximum cutter diameter up to 6".</li>
<li class="simple-check-list">The spindle height adjustment is displayed on a dial readout gauge for easy adjustment.</li>
<li class="simple-check-list">The table travels on a precision linear motion guide for stability. The table traverse is driven by hydraulic power system, ensuring very stable, smooth workpiece feeding. Thus, an accurate, fine cutting result is guaranteed.</li>
<li class="simple-check-list">Variable feed speed permits proper feed selection for hard or soft wood materials.</li>
<li class="simple-check-list">Powerful industrial motor for maximum cutting capacity.</li>
<li class="simple-check-list">Precision sealed long-life bearing. Heavy cast iron frames and table for durability use.</li>
</ul>
<p> </p>
<table style="width: 395px;" border="1" cellspacing="0" cellpadding="0">
<tbody>
<tr>
<td width="221">
<p><strong>SPECIFICATIONS:</strong></p>
</td>
<td width="174">
<p align="center"> </p>
</td>
</tr>
<tr>
<td width="221">
<p>Min. Working Length</p>
</td>
<td width="174">
<p align="center">8"</p>
</td>
</tr>
<tr>
<td width="221">
<p>Working Table Width</p>
</td>
<td width="174">
<p align="center">24"</p>
</td>
</tr>
<tr>
<td width="221">
<p>Max. Working Length</p>
</td>
<td width="174">
<p align="center">31"</p>
</td>
</tr>
<tr>
<td width="221">
<p>Max. Shaping Thickness</p>
</td>
<td width="174">
<p align="center">6"</p>
</td>
</tr>
<tr>
<td width="221">
<p>Dia. of Shaper Spindle</p>
</td>
<td width="174">
<p align="center">50 MM</p>
</td>
</tr>
<tr>
<td width="221">
<p>Speed at Shaper Spindle</p>
</td>
<td width="174">
<p align="center">9000 RPM</p>
</td>
</tr>
<tr>
<td width="221">
<p>Speed of Saw Spindle</p>
</td>
<td width="174">
<p align="center">3500 RPM</p>
</td>
</tr>
<tr>
<td width="221">
<p>Dia. of Saw Spindle</p>
</td>
<td width="174">
<p align="center">1"</p>
</td>
</tr>
<tr>
<td width="221">
<p>Saw Size</p>
</td>
<td width="174">
<p align="center">10"</p>
</td>
</tr>
<tr>
<td width="221">
<p>Shaping Speed</p>
</td>
<td width="174">
<p align="center">2.5 Times / Min.</p>
</td>
</tr>
<tr>
<td width="221">
<p>Glue Motor (SFJ-610G)</p>
</td>
<td width="174">
<p align="center">1/4 HP</p>
</td>
</tr>
<tr>
<td width="221">
<p>Shaper Spindle Drive Motor</p>
</td>
<td width="174">
<p align="center">15 HP</p>
</td>
</tr>
<tr>
<td width="221">
<p>Saw Drive Motor</p>
</td>
<td width="174">
<p align="center">3 HP</p>
</td>
</tr>
<tr>
<td width="221">
<p>Feeding Belt Motor</p>
</td>
<td width="174">
<p align="center">1 HP</p>
</td>
</tr>
<tr>
<td width="221">
<p>Hydraulic Pump Motor</p>
</td>
<td width="174">
<p align="center">2 HP</p>
</td>
</tr>
<tr>
<td width="221">
<p>Dust Hood Outlet (Dia.)</p>
</td>
<td width="174">
<p align="center">5"</p>
</td>
</tr>
<tr>
<td width="221">
<p>Machine Size (Lx W)</p>
</td>
<td width="174">
<p align="center">116" x 65"</p>
</td>
</tr>
<tr>
<td width="221">
<p>N.W.</p>
</td>
<td width="174">
<p align="center">2860 LBS</p>
</td>
</tr>
<tr>
<td width="221">
<p>G.W.</p>
</td>
<td width="174">
<p align="center">3420 LBS</p>
</td>
</tr>
</tbody>
</table>