<p>The Dotul AT-400 Dowel Driver is a free-standing single dowel insertion machine. The operator pre-glues the dowel hole, places the piece in front of the driver and presses on a foot pedal to insert the dowel. Dotul also offers machines that will make dowels. Ask your dealer for more information on these machines.</p>
<h3>Features:</h3>
<ul>
<li>The AT-400 Dowel Driver will drive ½" x 4" wood dowels to a preset depth into pre-glued dowel holes.</li>
<li>Table shims allow for quick changes between 1 3/8" + 1¾" + 2¼" thick doors.</li>
<li>The adjustable dowel driver rod will allow the operator to adjust the depth of the dowel to be driven into the pre-drilled dowel hole.</li>
<li>The machine will drive the dowels as fast as the operator can pre-glue the dowel holes and press the foot pedal.</li>
<li>The customer must specify the hole centers when ordering the dowel driver.</li>
</ul>
<p> </p>
<table>
<tbody>
<tr>
<td>
<p><strong>Specifications:</strong></p>
</td>
<td>
<p> </p>
</td>
</tr>
<tr>
<td>
<p>Air Requirements </p>
</td>
<td>
<p>90 PSI</p>
</td>
</tr>
<tr>
<td>
<p>Floor Space Required </p>
</td>
<td>
<p>2'6" wide by 4' deep</p>
</td>
</tr>
<tr>
<td>
<p>Driver Rod Length </p>
</td>
<td>
<p>½" x 9" adjustable</p>
</td>
</tr>
<tr>
<td>
<p>Adjustment for Rod </p>
</td>
<td>
<p>¾"</p>
</td>
</tr>
<tr>
<td>
<p>Cylinder Stroke </p>
</td>
<td>
<p>4" dia. x 6" stroke</p>
</td>
</tr>
<tr>
<td>
<p>Clamp Cylinder </p>
</td>
<td>
<p>4" dia. x 2" stroke</p>
</td>
</tr>
<tr>
<td>
<p>Dowel Hole Spacing (must be specified) </p>
</td>
<td>
<p>1½" 2" 2¼" 2½"</p>
</td>
</tr>
<tr>
<td>
<p>Table Size </p>
</td>
<td>
<p>24" wide x 16" deep</p>
</td>
</tr>
</tbody>
</table>
<p> </p>
<p> </p>
<p> </p>
<p> </p>