<p>Using the DT-526 Vertical Door Loader & Off-Loader at the end of the machining functions on the door, allows for the door to be unloaded and loaded on a pallet or door cart. </p>
<p>With the flip of a switch, the loader will change functions and allow the door exiting from the vertical door position be re-stacked (jambs cannot be attached).</p>
<h3><strong>Features:</strong></h3>
<ul>
<li>Adjustable air clamping for light or heavy doors.</li>
<li>Safety warning light when machine operates.</li>
<li>Guarded mechanical areas for safety.</li>
<li>Steel surfaces covered w/anti-marking materials.</li>
<li>Easy access to electrical control panel.</li>
<li>Air nozzle and hose for cleaning doors.</li>
<li>Swing away operator control panel.</li>
<li>Emergency stop arm.</li>
<li>Automatic door lifting and positioning.</li>
<li>Small shop foot print.</li>
<li>Will work with most vertical door machines.</li>
<li>Will load doors with raised moulding on both sides.</li>
<li>Doors with raised moulding two sides.</li>
<li>Doors from 18" - 48" wide.</li>
<li>Doors up to 108" in length.</li>
<li>1 3/8" to 2 1/4" thick doors.</li>
<li>Doors up to 250 lbs.</li>
<li>Re-stacking door capability.</li>
</ul>
<p> </p>
<table>
<tbody>
<tr>
<td>
<p><strong>Specifications:</strong></p>
</td>
<td>
<p> </p>
</td>
</tr>
<tr>
<td>
<p>Door Width</p>
</td>
<td style="text-align: center;">
<p>18" to 48"</p>
</td>
</tr>
<tr>
<td>
<p>Door Height</p>
</td>
<td style="text-align: center;">
<p>Up to 9'0"</p>
</td>
</tr>
<tr>
<td>
<p>Door Thickness</p>
</td>
<td style="text-align: center;">
<p>1 3/8" to 2 ¼"</p>
</td>
</tr>
<tr>
<td>
<p>Door Weight</p>
</td>
<td style="text-align: center;">
<p>Up to 250 lbs.</p>
</td>
</tr>
<tr>
<td>
<p>Uses</p>
</td>
<td style="text-align: center;">
<p>3 CFM of air 90 PSI</p>
</td>
</tr>
<tr>
<td>
<p>Electrical</p>
</td>
<td style="text-align: center;">
<p>230/460 volt 3 phase</p>
</td>
</tr>
<tr>
<td>
<p>Width</p>
</td>
<td style="text-align: center;">
<p>54" ~ <strong>with control panel ~ 82"</strong></p>
</td>
</tr>
<tr>
<td>
<p>Length</p>
</td>
<td style="text-align: center;">
<p>90"</p>
</td>
</tr>
<tr>
<td>
<p>Weight</p>
</td>
<td style="text-align: center;">
<p>1800 lbs.</p>
</td>
</tr>
</tbody>
</table>
<h6> </h6>
<h6>Additional Models Available:</h6>
<p>DT-540 (Unloads only)</p>
<p>DT-525 (Loads only)</p>
