<p>The 6800 provides a 74″ maximum crosscut. The maximum ripcut (horizontal) is dependent on pushing the panel through.</p>
<p><b>Features:</b></p>
<!--StartFragment-->
<ul>
<li>An upgraded, worm drive motor providing greater longevity.</li>
<li>1/64″ straight and square cutting tolerance compared to 1/32″ on our
H-Series Machines that’s made possible by additional bearings.</li>
<li>Additional steel welded at a diagonal plane adding significant weight to the frame.</li>
<li>A weighted pulley system for pulling the saw motor up and down the guide tubes vs a spring loaded counter balance.</li>
<li>Additional bearings within the motor providing a tighter cutting tolerance.</li>
<li>Aluminum material rollers instead of red material rollers.</li>
</ul>
<!--StartFragment-->
<p><strong>Standard Equipment:</strong></p>
<ul>
<li>3 HP worm driven heavy-duty saw motor.</li>
<li>10 ft. welded steel frame.</li>
<li>Chrome-plated 1 3/4″ guide tubes.</li>
<li>8 Nylatron roller bearing systems.</li>
<li>Adjustable vertical and horizontal rulers.</li>
<li>Quick change from vertical to horizontal cutting.</li>
<li>Thin material pressure guard.</li>
<li>Solid aluminum material rollers.</li>
<li>Enclosed counterweight system.</li>
<li>Integrated dust collection bonnet.</li>
<li>TUV certified to UL/CSA standards.</li>
</ul>
<p></p>
<table>
<tbody><tr>
<td width="153">
<p><b>Specifications:</b></p>
</td>
<td width="129">
</td>
</tr>
<tr>
<td width="153">
<p>Weight</p>
</td>
<td width="129">
<p>660 lbs</p>
</td>
</tr>
<tr>
<td width="153">
<p>Dimensions</p>
</td>
<td width="129">
<p>124 × 17 × 98 in</p>
</td>
</tr>
<tr>
<td width="153">
<p>Max. Crosscut</p>
</td>
<td width="129">
<p>74"/1850 mm</p>
</td>
</tr>
<tr>
<td width="153">
<p>Max. Rip Cut</p>
</td>
<td width="129">
<p>Unlimited</p>
</td>
</tr>
<tr>
<td width="153">
<p>Cut Depth</p>
</td>
<td width="129">
<p>1 ¾"/45 mm</p>
</td>
</tr>
<tr>
<td width="153">
<p>Cut Accuracy</p>
</td>
<td width="129">
<p>1/64"/.4 mm</p>
</td>
</tr>
<tr>
<td width="153">
<p>Frame Length</p>
</td>
<td width="129">
<p>120"/3050 mm</p>
</td>
</tr>
<tr>
<td width="153">
<p>Daily Usage</p>
</td>
<td width="129">
<p>3-5 Hours</p>
</td>
</tr>
<tr>
<td width="153">
<p>Rollers</p>
</td>
<td width="129">
<p>14</p>
</td>
</tr>
<tr>
<td width="153">
<p>Saw Blade Diameter</p>
</td>
<td width="129">
<p>8"/210 mm</p>
</td>
</tr>
<tr>
<td width="153">
<p>Motor</p>
</td>
<td width="129">
<p>13 amp, 120V</p>
</td>
</tr>
</tbody></table>
<!--EndFragment-->
<!--EndFragment-->