<!--StartFragment-->
<h3>The 22.5″ Super Duty Metal Cutting Series is the ultimate workhorse of the metal industry.</h3>
<p><strong>It is capable of operating 2 to 3 shifts per day in an industrial setting with the versatility to:</strong></p>
<ul>
<li>crosscut</li>
<li>bevel cut</li>
<li>miter cut</li>
<li>compound miter cut</li>
</ul>
<p>The model 22.5″ Super Duty Metal Cutting Series can cut 8” deep in a
single pass and has a crosscut capacity of 16” or 24″, depending on the
model chosen. This substantial 900-pound machine is made to withstand
years of industrial cutting.<br></p>
<p><strong>We pride ourselves in manufacturing an American-made product.</strong> From the motor to the heavy cast iron arm, the Super Duty Series radial arm saw is a dependable machine for years to come.</p>
<p>The Super Duty radial arm saw is made from cast and ductile iron for
vibration-free operation. It features heavy-gauge steel, powder-coated
frame, and legs, plus an oversized tabletop. With a TEFC (totally
enclosed fan cooled) motor and internal automatic brake, this radial arm
saw has the best cut quality in its class.</p>
<p><strong>The 22.5″ Super Duty Radial Arm Saws utilize a Variable Frequency Drive (VFD) to control the arbor motor</strong>.
Using the VFD increases the speed of the blade by over 8 seconds.
Because of the VFD, this saw has a slower, smoother start-up. This is
the only saw in the metal cutting series that uses VFD technology.</p>
<p>This series of radial arm saws features a T-slot aluminum extruded
table. Manual clamps are set in the extrusions. This upgraded table
provides the stability and support for heavy cutting.</p>
<p><strong>Do you have the capability to run 3 phase power at your location?</strong>
If so, this is the model you want. 3 phase power creates a smoother
motor start-up. With no relays or capacitors inside the motor, there
tends to be less maintenance and longer service life.</p>
<p><b>Features:</b></p>
<!--StartFragment-->
<ul>
<li>7.5 HP 3 phase TEFC (totally enclosed fan cooled) motor</li>
<li>50/60 HZ</li>
<li>208, 230, 460 or 575 volt motor</li>
<li>8” depth of cut</li>
<li>Automatic blade braking system</li>
<li>Manual chain crank crossfeed</li>
<li>Manual hand crank for refined carriage control</li>
<li>Adjustable crosscut stop</li>
<li>Base column lock</li>
<li>E-Stop</li>
<li>Standard lower elevation on front of frame</li>
<li>T-Slot Extruded Metal Table</li>
<li>Magnetic starter with low voltage and overload protection</li>
<li>Complete upper and lower blade guards</li>
<li>Standard work table height 34 ½ ″</li>
<li>Made in USA</li>
</ul>
<p>Max Crosscut: 24" wide</p>
<p> <!--EndFragment--></p>
<!--EndFragment-->
