<!--StartFragment-->
<p><strong>The 16″ Beam Saw (3 phase with 64″ crosscut) is crucial for speeding up production.</strong> </p>
<p>This massive machine, weighing
1500 pounds, is made from cast iron, cast aluminum, a box tubing beam,
and a steel frame. Use a Beam Saw in production for two to three work
shifts per day in an industrial setting.</p>
<p>The model 3691-01-03 can cut 5”
deep in a single pass and has the crosscut capacity of 64″ on 1” stock.
Its powerful motor lets the Beam Saw cut several pieces of material at a
time.</p>
<p><strong>Do you have the capability to run 3 phase power at your location?</strong>
If so, this is the model you want. 3 phase power creates a smoother
motor start-up. There tends to be less maintenance and longer service
life with no relays or capacitors inside the motor. </p>
<p><b>Features:</b></p>
<!--StartFragment-->
<ul>
<li>7.5 hp 3 phase TEFC (totally enclosed, fan-cooled) motor</li>
<li>50/60 HZ</li>
<li>208, 230, 460 or 575 volt motor</li>
<li>64” crosscut</li>
<li>5” depth of cut</li>
<li>Automatic Electro-Mechanical Brake</li>
<li>Manual Chain Crank Crossfeed</li>
<li>Magnetic Starter with Low Voltage Controls</li>
<li>T-slot Extruded Metal Table</li>
<li>Manual Clamping</li>
<li>Extruded Aluminum Fence</li>
<li>Complete Upper and Lower Blade Guarding</li>
<li>Replaceable Track</li>
<li>ON/OFF Push Buttons with E-Stop</li>
<li>Powder Coated Steel Frame and Legs</li>
<li>Wrench Kit</li>
<li>Made in the USA</li>
</ul>
<p> <!--EndFragment--></p>
<!--EndFragment-->