<!--StartFragment-->
<p><strong>The 20″ Beam Saw (3 phase with 62″ crosscut) model 3691-01-05 is the ultimate machine for industrial cutting.</strong> </p>
<p>This big saw weighs 1500 pounds
and is constructed of cast iron, cast aluminum, box tubing beam, and a
steel frame. Due to its durability, industrial facilities can use this
hefty machine for two to three work shifts per day.</p>
<p>This Beam Saw can cut 7” deep in a
single pass and has the crosscut capacity of 62″ on 1” stock. Its
powerful motor allows the Beam Saw to cut several pieces of material at a
time.</p>
<p><strong>Do you have the capability to run 3 phase power at your location?</strong>
If so, this is the model you want. 3 phase power creates a smoother
motor start-up. There tends to be less maintenance and longer service
life with no relays or capacitors inside the motor.</p>
<p><b>Features:</b></p>
<!--StartFragment-->
<ul>
<li>7.5 hp 3 phase TEFC (totally enclosed, fan cooled) motor</li>
<li>50/60 HZ</li>
<li>208, 230, 460 or 575 volt motor</li>
<li>62” crosscut</li>
<li>7” depth of cut</li>
<li>Automatic Electro-Mechanical Brake</li>
<li>Manual Chain Crank Crossfeed</li>
<li>Magnetic Starter with Low Voltage Controls</li>
<li>T-slot Extruded Metal Table</li>
<li>Manual Clamping</li>
<li>Extruded Aluminum Fence</li>
<li>Complete Upper and Lower Blade Guarding</li>
<li>Replaceable Track</li>
<li>ON/OFF Push Buttons with E-Stop</li>
<li>Powder Coated Steel Frame and Legs</li>
<li>Wrench Kit</li>
<li>Made in USA</li>
</ul>
<p> <!--EndFragment--></p>
<!--EndFragment-->