<!--StartFragment-->
<p>The 22.5″ Beam Saw (3 phase with
60″ crosscut) model 3691-01-07 is the largest saw manufactured by
Original Saw Company. This Beam Saw model maxes out at 1500 pounds and
is constructed of cast iron, cast aluminum, a box tubing beam, and a
steel frame. Use this Beam Saw to make repeated cuts in an industrial
setting.</p>
<p>This Beam Saw features a massive
8” depth of cut in a single pass and has the crosscut capacity of 60″ on
1″ stock. Model 3691-01-07 can also bevel cut a full 4″. This machine
is made to withstand years of industrial cutting. With a powerful 7.5 HP
motor, the Beam Saw can cut several pieces of material at a time.</p>
<p><strong>22.5″ Beam Saw Sets Itself Apart from the Rest</strong></p>
<p>The 22.5-inch model utilizes a
Variable Frequency Drive (VFD) to control the arbor motor. Using the VFD
allows the speed of the blade to increase over 8 seconds, which results in a smooth start-up.</p>
<p><strong>Do you have the capability to run 3 phase power at your location?</strong>
If so, this is the model you want. 3 phase power creates a smoother
motor start-up. There tends to be less maintenance and longer service
life with no relays or capacitors inside the motor.</p>
<p>Features:</p>
<!--StartFragment-->
<ul>
<li>7.5 hp 3 phase TEFC (totally enclosed, fan-cooled) motor</li>
<li>50/60 HZ 208, 230, 460 or 575 volt motor</li>
<li>60” crosscut</li>
<li>8” depth of cut</li>
<li>Automatic Electro-Mechanical Brake</li>
<li>Manual Chain Crank Crossfeed</li>
<li>Magnetic Starter with Low Voltage Controls</li>
<li>T-slot Extruded Metal Table</li>
<li>Manual Clamping</li>
<li>Extruded Aluminum Fence</li>
<li>Complete Upper and Lower Blade Guarding</li>
<li>Replaceable Track</li>
<li>ON/OFF Push Buttons with E-Stop</li>
<li>Powder Coated Steel Frame and Legs</li>
<li>Wrench Kit</li>
<li>Made in the USA</li>
</ul>
<p> <!--EndFragment--></p>
<!--EndFragment-->
