<p><!--StartFragment-->Cutting and routing full sized panels is often a job that’s dreaded in the shop due to effort required or fear of getting too close to exposed tooling. The SR5 Saw & Router combination machine features a heavily guarded blade and can be changed from a saw to a router in under a minute, all while delivering an accuracy of 1/64” straight and square. The SR5 & is ideal for shops doing extensive cutting, and dado or rabbet routing. The interchangeable motor carriage features a rotating saw and router for sizing panels by pushing the panel through and making a ripcut, or by letting gravity take control and pushing the saw or router down for making a vertical crosscut. The patented self-adjusting, floating router carriage provides a consistent depth of cut. Our MID-WAY Fence® allows for processing smaller panels at waist level.</p>
<h3><strong>Standard Equipment:</strong></h3>
<ul>
<li>3¼ HP, 15 amp industrial duty saw motor.</li>
<li>1¾ HP, 11 amp industrial duty router motor.</li>
<li>10 ft. Welded steel frame.</li>
<li>Chrome plated 1¾" guide tubes.</li>
<li>8 Nylatron roller bearing systems.</li>
<li>Adjustable vertical and horizontal rulers.</li>
<li>Quick change from vertical and horizontal cutting.</li>
<li>Thin material pressure guard.</li>
<li>Injection molded plastic material rollers.</li>
<li>Enclosed counterweight system.</li>
<li>Adjustable floating router head.</li>
<li>MID-WAY FENCE™ with stop.</li>
<li>4 material clamps.</li>
<li>2 blind dado stops.</li>
<li>Extended warranty.</li><li><!--StartFragment-->TUV certified to UL/CSA standards.<!--EndFragment--></li>
</ul>
<p></p>
<table>
<tbody><tr>
<td width="273">
<p><b>Specifications:</b></p>
</td>
<td width="219">
</td>
</tr>
<tr>
<td width="273">
<p>Weight</p>
</td>
<td width="219">
<p>538 lbs</p>
</td>
</tr>
<tr>
<td width="273">
<p>Dimensions</p>
</td>
<td width="219">
<p>120 × 11 × 83 in</p>
</td>
</tr>
<tr>
<td width="273">
<p>Maximum cutting height</p>
</td>
<td width="219">
<p>62"/1575mm</p>
</td>
</tr>
<tr>
<td width="273">
<p>Max. Rip Cut</p>
</td>
<td width="219">
<p>Unlimited</p>
</td>
</tr>
<tr>
<td width="273">
<p>Max. Cut Thickness</p>
</td>
<td width="219">
<p>1 3/4"/45mm</p>
</td>
</tr>
<tr>
<td width="273">
<p>Cut Accuracy, Straight and Square</p>
</td>
<td width="219">
<p>1/64"/.4mm</p>
</td>
</tr>
<tr>
<td width="273">
<p>Saw Blade Diameter</p>
</td>
<td width="219">
<p>8"/210mm</p>
</td>
</tr>
<tr>
<td width="273">
<p>Circular Saw Motor amperage and volts</p>
</td>
<td width="219">
<p>15 amps, 120 Volt</p>
</td>
</tr>
<tr>
<td width="273">
<p>Circular Saw Motor Manufacturer</p>
</td>
<td width="219">
<p>Milwaukee Tool</p>
</td>
</tr>
<tr>
<td width="273">
<p>Router Motor amperage and volts</p>
</td>
<td width="219">
<p>11 amp, 120V</p>
</td>
</tr>
<tr>
<td width="273">
<p>Router Motor Manufacturer</p>
</td>
<td width="219">
<p>Milwaukee Tool</p>
</td>
</tr>
<tr>
<td width="273">
<p>Frame Length</p>
</td>
<td width="219">
<p>120"/3050mm</p>
</td>
</tr>
<tr>
<td width="273">
<p>Router Bit Collet</p>
</td>
<td width="219">
<p>1/4" or 1/2" collet router bits</p>
</td>
</tr>
</tbody></table>
<h3> <br></h3>
<div>
<table style="width: 337px;">
<tbody>
<tr>
</tr></tbody></table></div>
