<p>Castaly Auto Slide Shaper, End Tenoner / Match with Dowel Drill CS-2145DR is one of several options offered by Castaly. Refer to features and specifications to find the one that best meets your needs.</p>
<h3>Features:</h3>
<div>
<ul>
<li>Fully automatic cycle function, just place the material against the stops, machine will automatic clamp, move in for shaping and drilling, come out and release the hold down.</li>
<li>Fast, safe and labor saving.</li>
<li>One shaper head and one drill head for the dowel at each side of the table.</li>
<li>The 6" high stackable spindle by pneumatic up & down with 3 different stops are easily and accurately setup for each cutter position.</li>
<li>Table moves from right to left by variable speed pneumatic-hydraulic power to achieve the full cutting power.</li>
<li>Twin table moves in and out separated for tongue and groove, end match application.</li>
<li>Twin heavy-duty pneumatic pistons hold down the workpieces tightly to the table during the cutting process.</li>
<li>Rigid construction on the heavy sheet metal frame, case iron table & base for durability usage.</li>
<li>Heavy duty industrial motor is suitable for heavy duty cutting under full load.</li>
<li>Linear guide rails and bearings let the operator moving the table smoothly.</li>
<li>Cast iron fence locks in the table groove to finish 45-degree cut easily.</li>
</ul>
<p> </p>
<table style="width: 450px;" border="1" cellspacing="0" cellpadding="0">
<tbody>
<tr>
<td width="276">
<p><strong>SPECIFICATIONS:</strong></p>
</td>
<td width="174">
<p> </p>
</td>
</tr>
<tr>
<td width="276">
<p>Max. Cutting Length</p>
</td>
<td width="174">
<p align="center">Unlimited</p>
</td>
</tr>
<tr>
<td width="276">
<p>Max. Cutting Width (45 degree)</p>
</td>
<td width="174">
<p align="center">9"</p>
</td>
</tr>
<tr>
<td width="276">
<p>Max. Cutting Width (90 Degree)</p>
</td>
<td width="174">
<p align="center">11"</p>
</td>
</tr>
<tr>
<td width="276">
<p>Max. Cutter Diameter</p>
</td>
<td width="174">
<p align="center">6" Dia</p>
</td>
</tr>
<tr>
<td width="276">
<p>Spindle Diameter</p>
</td>
<td width="174">
<p align="center">1 1/4"</p>
</td>
</tr>
<tr>
<td width="276">
<p>Spindle Length</p>
</td>
<td width="174">
<p align="center">7" (Stackable)</p>
</td>
</tr>
<tr>
<td width="276">
<p>Spindle Speed</p>
</td>
<td width="174">
<p align="center">9000 RPM</p>
</td>
</tr>
<tr>
<td width="276">
<p>Shaper Spindle Motor</p>
</td>
<td width="174">
<p align="center">5 HP x 2</p>
</td>
</tr>
<tr>
<td width="276">
<p>Dowel Drill Chuck</p>
</td>
<td width="174">
<p align="center">½” x 2</p>
</td>
</tr>
<tr>
<td width="276">
<p>Dowel Drill Motor</p>
</td>
<td width="174">
<p align="center">1 HP x 2</p>
</td>
</tr>
<tr>
<td width="276">
<p>Dust Hood</p>
</td>
<td width="174">
<p align="center">4" x 4</p>
</td>
</tr>
<tr>
<td width="276">
<p>Net Weight</p>
</td>
<td width="174">
<p align="center">3200 LBS</p>
</td>
</tr>
</tbody>
</table>
</div>
